Mesin Laminating GMP Q-Topic 380
Q-Topic 380
May 21, 2020
Mesin Laminating Excelam II 355 Q
Excelam II -355Q
May 21, 2020
Mesin UCHIDA Foilglazer Mesin Laminating dan Foil dalam satu mesin

Mesin UCHIDA Foilglazer Mesin Laminating dan Foil dalam satu mesin

UCHIDA Foilglazer

Foilglazer adalah mesin sekering laminating & foil yang kuat. Ini menampung kertas hingga ukuran 365x600mm mencakup sebagian besar cetakan digital.

Laminating & Foil kini dalam satu mesin!

Pengaturan mudah, operasi intuitif: Foilglazer memiliki feeder yang dapat dibuka. Ini membuat pengaturan film dan perawatan rutin menjadi mudah. Kontrol layar sentuh sangat intuitif untuk dioperasikan.

Pengumpanan hisap udara otomatis: Berkat teknologi pengisapan udara Uchida, Foilglazer dapat mengumpankan berbagai cetakan secara konsisten. Pengumpan dapat mengambil media dari berat 110gsm hingga 400gsm.

Tingkatkan produktivitas Anda: Kecepatan mengemudi maksimum Foilglazer adalah 5m / mnt. Berkat mekanisme pemotongan film otomatis, operator dapat pergi begitu mesin dihidupkan.

SPESIFIKASI :

Fungsi: Laminating and foilglazing (foil fusing)

Feedable paper size: Laminating: 297(W)x210(L) – 365(W)x600(L) mm, Foilglazing: 148(W)x210(L) – 365(W)x600(L) mm

Paperweight: 110 – 400 gsm*

Paper quality: Coater paper, Art paper, Fine quality paper etc.

*Please validate some sheets to check the results before production.

Feeding mechanism: Upper belt air suction feed + blower

Operation: 4.3″ color touch screen, Inching switch (forward/backward), Pressure roller lifting lever, Emergency button

Feed tray capacity: 50mm

Delivery speed: Laminating: 5m/min, Foilglazing: 3m/min.

Usable film: (Laminating)Width: 200 – 340mm, Outer diameter: Up to 200mm, Thickness: 20 – 45 micron, Core diameter: 2 inch (58mm)

Usable film: (Foilglazing)Width: 320mm, Outer diameter: Up to 200mm, Core diameter: 1 inch (26mm)

Laminating method: Heat roller + halogen heater

Warm up time: less than 10 min.

Roller temperature: Off / 80 – 160 °C

Roller pressure: Pneumatic

Required compressor: Discharge amount more than 5.0L/min, Tank capacity more then 5.0L, Tube diameter 6mm, Minimum pressure 0.6MPa

Separation method: Burst cutting

Dimensions: Main body: 582(W)x621(D)x535(H) mm

With feed tray and stacker: 1,717(W)x621(D)x535(H) mm

With machine table: 1,717(W)x621(D)x1,206(H) mm

Weight: Complete package: 85 kgs

Power source: 100-120VAC or 220-240VAC 50/60Hz, single phase

Power consumption: 1,500W

Options: Machine table, Ultrasonic double feed sensor, Dust removal roller, Side blowers for feeder, Laminating film slitter

*Production rates are based on optimal operating conditions and may very depending on stock and environmental